Nationwide Boiler Inc

Rentals Sales Service
24/7 Emergency Assistance
Emergency Preparedness Guide

For over 30 years Nationwide Boiler has supplied low NOx solutions focused on lowering overall industrial greenhouse gas emissions and increasing efficiency through innovative air pollution control solutions. Today, Nationwide Boiler leads the nation with the highest number of successful low NOx rental and new boiler systems, revolved around Nationwide's extensive family of products, including EconoStak economizers and CataStak™ Selective Catalytic Reduction (SCR) technology. Nationwide Boiler’s complete engineering and customer support and start-up teams take the risk out of meeting tough emission requirements without jeopardizing equipment performance and reliability, ensuring that each project will exceed our customer’s expectations from start to finish.

Decrease Emissions - Reduce Costs - Improve Efficiency - E2Stak - EconoStak - CataStak

With emission limits continuing on a downward trend, the Nationwide Boiler CataStak™ SCR System is the choice for ultra low NOx emissions compliance. After years of field testing on numerous rental projects, selective catalytic reduction was recognized as the one solution that met all of Nationwide Boiler's objectives: It was economical, reliable, easy-to-operate, efficient and reduced emissions to single digit NOx levels.  Complete our docCataStak Quote Request Form today for a free budget estimate.

 CataStak SCR System -  Packaged Watertube Boilers

The enormous success of the company's development of modular SCR systems on Nationwide Boiler's rental fleet suggested to company management that a market existed for a field-retrofit system for package boilers. Thus the CataStak™ SCR System was born. Today, Nationwide Boiler leads the nation with the most low NOx solutions for less than 5 pm NOx and the CataStak™ has become the standard for compliance assurance, reliability and product quality.  The CataStak™ has successfully been applied to package watertube boilers, firetube boilers, gas-turbine applications, gas-fired heaters, and nitric acid applications.  An ammonia-free SCR option is also available for plant owners and operators who desire an ammonia-free alternative.

The CataStak SCR System: Watertube Boiler Project Spotlights

CataStak SCR System - 177,000 lb/hr Watertube Boiler CataStak SCR System for a 177,000 lb/hr boiler for a major refinery in OK. CataStak SCR System - 70,000 lb/hr Watertube Boiler CataStak SCR System for a 70,000 lb/hr boiler for a major salt processing plant in CA.
CataStak SCR System - 140,000 lb/hr Watertube Boiler CataStak SCR System for a 140,000 lb/hr boiler for a fruit processing plant in CA. CataStak SCR System - 200,000 lb/hr Watertube Boiler CataStak SCR System for a 200,000 lb/hr boiler for a chemical processing plant in TX.

System Overview

The CataStak™ SCR system can be installed either vertically or horizontally and has been installed in boiler applications ranging from 800 HP to over 200,000 PPH. It consists of a single-reactor housing with NOx or CO reducing catalyst and a standard ammonia delivery system (pure anhydrous ammonia, aqueous ammonia or urea). Nationwide Boiler's NOx reduction control system for the precise control flow of ammonia and an ammonia injection grid is also included. Ammonia can also be supplied by a vaporizer unit.

Catalyst Features

Nationwide Boiler offers either honeycomb or pelletized catalyst, based on the specific application and equipment type. The unique design of the catalyst provides high NOx or CO removal activity, low pressure drop, low SO2 oxidation rate and excellent durability. The catalyst features are key to:

  • High NOx or CO removal level with minimum ammonia slip
  • Low activity towards SO2 oxidation, minimizing the risk of fouling downstream equipment
  • High poison resistance ensuring a long and stable service life

Ammonia Delivery System

Nationwide's standard ammonia delivery system consists of the anhydrous ammonia storage, Nationwide Boiler's NOx reduction control system with a mass ammonia control valve and the ammonia injection grid.Anhydrous ammonia is typically stored in standard 150 lb. gas cylinders that connect to a manifold which accommodates up to three cylinders, allowing each cylinder to be isolated and  switched over on-line.  Anhydrous ammonia  gas cylinders are the most cost-effective and practical storage method for most systems, however alternate delivery systems can also be supplied.

Ammonia Control Flow Unit

Ammonia flow control components are skid mounted in a compact space-saving  arrangement where all operating devices are within close proximity of each other and within easy access for the operator.  The NOx reduction control system includes a vapor ammonia header with a pressure regulator, and  a “smart” flow control valve.  A dilution  air blower is also provided. The flow rate of the ammonia is controlled based on the fuel flow measurements and pre-determined NOx emissions.

Ammonia Injection Grid

The Ammonia Injection Grid (AIG) consists of a header feeding a group of injection lances distributed across the flue gas duct.  The AIG provides uniform injection of the ammonia/air mixture over the duct cross section.

The CataStak™ SCR System is designed as a cost-effective answer to reducing stack emissions and has been proven in many types of demanding applications, easily meeting or exceeded NOx emission guarantees. It is designed for stand-alone operation with minimum operator intervention. benefits include:

  • Lower GHG - dramatic reduction in stack emissions
  • Easy field retrofit - no burner or fan changes required
  • Simple controls - minimum operator intervention
  • Low operating costs with stand-alone operation

The CataStak SCR System Timeline - Decades of Innovation

1990’s - Nationwide Boiler selected selective catalytic reduction (SCR) technology as the answer to NOx compliance. SCR technology was the most economical, efficient, reliable and easy to operate solution, capable of easily exceeding 9 ppm NOx limits to as low as 5 ppm.

October 1999 - Nationwide Boiler was the first rental boiler company to conduct a SCR field demonstration on a packaged watertube boiler, later to be branded and trademarked as the CataStak™ SCR System.

1999 - Nationwide Boiler offers the CataStak™ SCR system on their rental watertube boilers.

2004 - Nationwide Boiler expands the product offering of the CataStak™ SCR system to include boiler retrofits and new boiler installations to meet sub-9 ppm NOx levels."

2008 - Nationwide Boiler expands its role as the low NOx solutions provider with the introduction of the company’s new business unit, Nationwide Environmental Systems (NES). NES is formed to address and supply industry wide needs for complete Green House Gas plant solutions through innovative, low NOx air pollution control solutions for package boilers, gas turbines, heaters, steam generators, and nitric acid applications.

2010 - Nationwide supplies more SCR system retrofits/installations to the industry than any other supplier in the industry.

2011 - Nationwide Boiler, along with Combustion Components Associates Inc., develops the Ammonia-Free CataStak™ SCR system for firetube boilers, utilizing the Combustion Components Associates Inc. patented TRIM-NOX™ urea injection system. This safe, low NOx SCR solution provides >90% NOx reduction and eliminates the need for boiler operators to store or handle ammonia.

2012 - The Ammonia-Free CataStak™ is expanded to operate with packaged watertube boilers.

Today - The Nationwide Boiler supplied CataStak™ SCR systems lead the industry with the best track record in terms of performance and reliability, exceeding current local, regional or national emission regulations and requirements.

CataStak SCR System

 

Nationwide Boiler developed the CataStak-FT Selective Catalytic Reduction (SCR) system specifically for small, firetube boiler applications. Based on Nationwide Boiler’s proven CataStak™ SCR System technology, the CataStak-FT SCR system has been economically designed to provide reliable NOx performance for firetube boilers up to 800 HP.

CataStak-FT SCR System


In addition to dependable low NOx performance, the CataStak-FT SCR system also provides high operating energy efficiency gains, better turndown than other ultra low NOx technologies, simple controls, and is easy to retrofit on existing equipment. Overall the CataStak has been designed as a cost-effective answer to reducing stack emissions and easily meets any performance requirement.

The CataStak-FT SCR System Provides

  • Less than 5 ppm NOx Performance
  • Higher Operating Efficiency (May Qualify for Energy Incentives)
  • Lower FD Fan Horsepower vs. ULN Burners
  • Stable Flame Performance
  • No Load Following Issues
  • Low Pressure Drop (1”wc)
  • NOx Reduction Control System Easily Integrates to any Boiler
  • No Operator Intervention Required (Auto Start/Stop)
  • Simple “In Stack” Retrofit Installation
  • Uses Standard 150 lb Ammonia Bottles (No RMP Required)

The CataStak-FT SCR System: Firetube Boiler Project Spotlights

CataStak-FT SCR System - 800 hp Boiler System

CataStak-FT for an 800 HP firetube boiler for a tomato processing plant in CA.  
CataStak-FT SCR System - 1000 hp Boiler System CataStak-FT for a 1000 HP boiler for a  major pharmaceutical facility in CA.
 CataStak-FT SCR System - 800 hp Boiler System CataStak-FT for a 800 HP firetube boiler for dairy processing plant in CA.

 CataStak-FT SCR Systems

 

Similar to other combustion processes, the primary pollutants of gas turbines include NOx and CO. For turbines with heat recovery, the exhaust temperature can drop below 300°F. With those factors in mind, it only made sense that Nationwide Boiler developed CataStak™ SCR system technology for gas turbine applications.

CataStak-GT SCR System

Turbine applications requiring low NOx upgrades are easily accomplished with the CataStak-GT SCR system.  The CataStak-GT delivers reliable 2.5 ppm NOx performance for gas turbine applications starting at 0.5 MW and operating up to 1000°F.  It includes Nationwide Boiler's NOx reduction ammonia control flow unit, an ammonia injection grid, the catalyst reactor housing, DeNOx catalyst, and design and engineering services.

The CataStak-GT system's innovative design includes simple controls, requires minimal operator intervention (Auto Start/Stop) and is easy to retrofit on existing equipment (vertical or horizontal arrangements). As an option, an E2Stak Solution, combining the lowest emissions with the highest efficiency possible, can also be applied to a turbine application with the addition of an EconoStak economizer, helping realize a quicker return on investment through positive efficiency gains.

The CataStak-GT SCR System: Project Spotlights

CataStak-GT SCR System - 1.2 MW Gas Turbine

CataStak-GT for a 1.2 MW Solar Saturn gas turbine compressor set with waste heat recovery to less than 5 ppm for an independent oil and gas producer in CA.  
CataStak-GT SCR System - 4 MW Gas Turbine CataStak-GT for a Allison 501 4 MW gas turbine used for 1200 psi down hole steam injection for an oil producer in CA. 
CataStak-GT SCR System - 5 MW Gas Turbine
CataStak-GT SCR system including HRSG and
duct burner ready for shipment at Nationwide
Boiler's shop.

CataStak-GT SCR Systems

Home Environmental Solutions
Follow Us On Social Media Twitter Facebook Google Plus Linked In Boiler Blog Watch Us on YouTube